Product Description

AeroReflect Foam Insulation for roofs and walls is a closed cell, cross-linked foam core encapsulated between extra heavy duty reflective reinforced aluminum foil laminates. Foam core is a high quality foam product suitable for use in roofs & walls. It reduces up to 95% of the sun’s radiant heat, minimizes the risk of condensation and acts as an effective water and vapor barrier when installed correctly.

Foam core multipurpose incorporates a 150 mm overlap along one side edge to maximize coverage, minimize wastage and allow sealed edge protection to improve aesthetics in exposed applications. An anti-glare coating is applied to one side of the product to reduce the level of glare experienced during installation.

Product Construction

AeroReflect Foam Insulation is made with aluminum foil laminated with reflectivity of 95% and emissivity of 0.05 and emissivity of 0.03 to the other, which complies with ASTM Standard E 408. Core are made of 8, 7, 6.5 & 4 mm of chemically cross-linked, closed-cell XLPE polyolefin foam.

Aerofoam® uses Advanced Laminating Technology for the polymer adhesive which remains tacky for an indefinite period and provides superior resistance to heat, fire and delamination.

  • Highly effective in dampening noise
  • Fiber-free and non-allergenic
  • Water resistant and fire resistant
  • Corrosion resistant.

Physical Specifications:

Nominal thickness Width  Overlap/Flap Length Area per roll
mm mm mm mm m2
8 1350 150 22.25 30
7 1350 150 22.25 30
6.5 1350 150 22.25 30
4 1500 20 / 6.67 30 / 10

Note: Aerofoam® reflective foam insulation products must be kept dry and out of contact with alkaline products.


All the requirements of the National Construction Code and Building Code of Australia for insulation and pliable building membranes are met by AeroReflect Foam Insulation since it complies with AS/NZS 4859.1:2002/Amdt 1:2006 and AS/NZS 4200.1:1994.


This product should be stored upright and under cover in a clean, dry place in the pack provided.

Product Specification

The insulation to be installed shall be AeroReflect Foam Insulation double sided reflective, fibre-free thermal reflective insulation, comprised of cross-linked, closed-cell core XLPE foam with anti-glare foil facing on one side and plain foil facing on the other side, thermal resistance R0.2 and 150mm overlap piece included.

  • Emittance Bright Side: 0.03, Anti-glare Side: 0.05
  • Vapor Barrier Classification: Medium
  • Water Barrier Classification: High
  • Duty: Extra Heavy in accordance with AS/NZS 4200.1:1994
  • Corrosion Resistance: AS/NZS 4859.1:2002 passed.

Health and safety

AeroReflect Foam Insulation has been assessed. As a result of the assessment, this product is classified as non-hazardous. To reduce risk of UV damage when installing this product, wear protective clothing, safety glasses, sunscreen and work in the shade wherever practical.


Required Accessories :